 |
Back |
For full Warranty details please refer to the product profile!
Healthcare Materials - Restricted - Low-Consistency Elastomers
Details: MED3-4220 - Fast cure low consistency silicone elastomer
| Product Profile: | MED3-4220.pdf |
|---|---|
| MSDS PDF A: | en_gb_sds_nusimed3-4220.pdf |
Basic Product Overview: |
|
| Section: | Healthcare Materials - Restricted |
| Description: | Low-Consistency Elastomers |
| NuSil ID: | MED3-4220 |
| Viscosity A: | 84,000 |
| Viscosity B: | 65,000 |
| Flow/Viscosity: | 74,500 |
| Cure System: | Platinum |
| Work Time: | 15 M |
| Cure Time/Temp: | 30 M / 150 |
| Specific Gravity: | 1.11 |
| Durometer Type A Typical: | 25 |
| Tensile psi Typical: | 1,000 |
| Tensile MPa Typical: | 7.6 |
| Elongation Percent Typical: | 624 |
| Tear PPI Typical: | 74 |
| Tear kN/m Typical: | 13.5 |
| Mix Ratio: | 1:1 |
| Colour: | Trans |
| Comments: | Fast cure low consistency silicone elastomer |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
