 |
Back |
For full Warranty details please refer to the product profile!
Engineering Materials - General Purpose - Adhesives and Sealants
Details: R34-2186 - Tough non-slump used for a general adhesive, glob top encapsulation, or forming gaskets.
| Product Profile: | R34-2186P.pdf |
|---|---|
Basic Product Overview: |
|
| Section: | Engineering Materials - General Purpose |
| Description: | Adhesives and Sealants |
| NuSil ID: | R34-2186 |
| Cure Time/Temp: | 15 M / 150 |
| Specific Gravity: | 1.09 |
| Durometer Type A Typical: | 48 |
| Tensile psi Typical: | 830 |
| Tensile MPa Typical: | 5.7 |
| Elongation Percent Typical: | 340 |
| Tear PPI Typical: | 70 |
| Tear kN/m Typical: | 12.3 |
| Mix Ratio: | 1:1 |
| Colour: | Trans |
| Comments: | Tough non-slump used for a general adhesive, glob top encapsulation, or forming gaskets. |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
