 |
Back |
For full Warranty details please refer to the product profile!
Engineering Materials - General Purpose - Fluorosilicone Adhesive and Sealant
Details: MED-5440 - Liquid injection molding fluorosilicone liquid silicone rubber
| Product Profile: | MED-5440.pdf |
|---|---|
| MSDS PDF A: | en_gb_sds_nusimed-5440.pdf |
Basic Product Overview: |
|
| Section: | Engineering Materials - General Purpose |
| Description: | Fluorosilicone Adhesive and Sealant |
| NuSil ID: | MED-5440 |
| Cure Time/Temp: | 30 M / 150 |
| Specific Gravity: | 1.38 |
| Durometer Type A Typical: | 30 |
| Tensile psi Typical: | 1250 |
| Tensile MPa Typical: | 8.6 |
| Elongation Percent Typical: | 380 |
| Tear PPI Typical: | 60 |
| Tear kN/m Typical: | 10.6 |
| Mix Ratio: | 1:1 |
| Colour: | Trans |
| Comments: | Liquid injection molding fluorosilicone liquid silicone rubber |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
