 |
Back |
For full Warranty details please refer to the product profile!
50ml cart 1-1 kit
200ml cart 1-1 kit
400ml cart 1-1 kit
2 pint kit 1 - 1 plastic
2 gallon kit 1 - 1 plastic bucket
10 gallon kit 1 - 1 metal
Engineering Materials - General Purpose - LSR Elastomers
Details: LSR-5810 - Liquid Injection Molding Elastometer 10 shore A, high elongation high tear
| Product Profile: | LSR-5810P.pdf |
|---|---|
| MSDS PDF A: | LSR5810A.pdf |
| MSDS PDF B: | LSR5810B.pdf |
Basic Product Overview: |
|
| Section: | Engineering Materials - General Purpose |
| Description: | LSR Elastomers |
| NuSil ID: | LSR-5810 |
| Flow/Viscosity: | 65g/M |
| Cure System: | PT Addition |
| Work Time: | 72 HR |
| Cure Time/Temp: | 5 M / 150 |
| Specific Gravity: | 1.07 |
| Durometer Type A Typical: | 11 |
| Tensile psi Typical: | 750 |
| Tensile MPa Typical: | 5.2 |
| Elongation Percent Typical: | 1075 |
| Tear PPI Typical: | 70 |
| Tear kN/m Typical: | 12.3 |
| Operating Temp: | -65 to 240 |
| Mix Ratio: | 1:1 |
| Colour: | Trans |
| Comments: | Liquid Injection Molding Elastometer 10 shore A, high elongation high tear |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
