 |
Back |
For full Warranty details please refer to the product profile!
Healthcare Materials - Simethicone - Simethicone Emulsion
Details: MED-343 - Chemically inert, therefore does not alter the characteristics of material to be defoamed
| Product Profile: | MED-343P.pdf |
|---|---|
| MSDS PDF A: | MED343.pdf |
Basic Product Overview: |
|
| Section: | Healthcare Materials - Simethicone |
| Description: | Simethicone Emulsion |
| NuSil ID: | MED-343 |
| Flow/Viscosity: | 185 cP (185 mPas) |
| Cure System: | - - |
| Solids Content: | - - |
| Work Time: | - - |
| Cure Time/Temp: | - - |
| Post Cure Time/Temp: | - - |
| Specific Gravity: | - - |
| Durometer Type A Certified: | - - |
| Durometer Type A Typical: | - - |
| Tensile psi Certified: | - - |
| Tensile psi Typical: | - - |
| Tensile MPa Certified: | - - |
| Tensile MPa Typical: | - - |
| Elongation Percent Certified: | - - |
| Elongation Percent Typical: | - - |
| Tear PPI Certified: | - - |
| Tear PPI Typical: | - - |
| Tear kN/m Certified: | - - |
| Tear kN/m Typical: | - - |
| Lap Shear psi/Mpa: | - - |
| Dielectric Strength V/mil: | - - |
| Operating Temp: | - - |
| Plasticity/Viscosity/Extrusion Typical: | - - |
| Stress Strain: | - - |
| Mix Ratio: | - - |
| Colour: | White |
| Comments: | Chemically inert, therefore does not alter the characteristics of material to be defoamed |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
