 |
Back |
For full Warranty details please refer to the product profile!
Engineering Materials - General Purpose - Fluorosilicone Adhesive and Sealant
Details: CF5-3521-2 - Two-part, Fluorosilicone. Elastomer Cures at room temperature or rapidly with heat.
| Product Profile: | CF5-3521-2.pdf |
|---|---|
| MSDS PDF A: | CF5-3521-2_EU_English.pdf |
Basic Product Overview: |
|
| Section: | Engineering Materials - General Purpose |
| Description: | Fluorosilicone Adhesive and Sealant |
| NuSil ID: | CF5-3521-2 |
| Flow/Viscosity: | - - |
| Cure System: | PT Addition |
| Solids Content: | - - |
| Work Time: | 3.5 HR |
| Cure Time/Temp: | 48 HR |
| Post Cure Time/Temp: | - - |
| Specific Gravity: | 1.30 |
| Durometer Type A Certified: | - - |
| Durometer Type A Typical: | 30 |
| Tensile psi Certified: | - - |
| Tensile psi Typical: | 550 psi |
| Tensile MPa Certified: | - - |
| Tensile MPa Typical: | 3.8 Mpa |
| Elongation Percent Certified: | - - |
| Elongation Percent Typical: | 275 |
| Tear PPI Certified: | - - |
| Tear PPI Typical: | 35 |
| Tear kN/m Certified: | - - |
| Tear kN/m Typical: | 6.2 |
| Lap Shear psi/Mpa: | - - |
| Dielectric Strength V/mil: | - - |
| Operating Temp: | - - |
| Plasticity/Viscosity/Extrusion Typical: | - - |
| Stress Strain: | - - |
| Mix Ratio: | 1:1 |
| Colour: | - - |
| Comments: | Two-part, Fluorosilicone. Elastomer Cures at room temperature or rapidly with heat. |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
