 |
Back |
For full Warranty details please refer to the product profile!
Engineering Materials - General Purpose - Coatings Ice-Phobic
Details: R-2180-2 - Two-part silicone elastomer dispersed in xylene
| Product Profile: | R-2180-2.pdf |
|---|---|
| MSDS PDF A: | en_gb_sds_nusir-2180-2.pdf |
Basic Product Overview: |
|
| Section: | Engineering Materials - General Purpose |
| Description: | Coatings Ice-Phobic |
| NuSil ID: | R-2180-2 |
| Flow/Viscosity: | 3275 cP |
| Cure System: | Platinum |
| Cure Time/Temp: | see PDF |
| Durometer Type A Typical: | 45 |
| Tensile psi Typical: | 1650 |
| Tensile MPa Typical: | 11.4 |
| Elongation Percent Typical: | 1000 |
| Tear PPI Typical: | 300 |
| Tear kN/m Typical: | 52.9 |
| Operating Temp: | -50 to 250°C |
| Mix Ratio: | 1:1 |
| Colour: | Trans/Black |
| Comments: | Two-part silicone elastomer dispersed in xylene |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
