 |
Back |
For full Warranty details please refer to the product profile!
Engineering Materials - General Purpose - Coatings Ice-Phobic
Details: R-2180 - Two-part silicone elastomer dispersed in xylene
| Product Profile: | R-2180.pdf |
|---|---|
| MSDS PDF A: | en_gb_sds_nusir-2180.pdf |
Basic Product Overview: |
|
| Section: | Engineering Materials - General Purpose |
| Description: | Coatings Ice-Phobic |
| NuSil ID: | R-2180 |
| Flow/Viscosity: | 3075 |
| Cure System: | Platinum |
| Solids Content: | - - |
| Work Time: | >72 HR |
| Cure Time/Temp: | see pdf |
| Durometer Type A Typical: | 40 |
| Tensile psi Typical: | 1700 |
| Tensile MPa Typical: | 11.7 |
| Elongation Percent Typical: | 1050 |
| Tear PPI Typical: | 300 |
| Tear kN/m Typical: | 52.9 |
| Dielectric Strength V/mil: | - - |
| Mix Ratio: | 1:1 |
| Colour: | Trans |
| Comments: | Two-part silicone elastomer dispersed in xylene |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
