 |
Back |
For full Warranty details please refer to the product profile!
50ml cart 1-1 kit
2 pint kit 1 - 1 plastic
2 gallon kit 1 - 1 plastic bucket
10 gallon kit 1 - 1 plastic
Engineering Materials - General Purpose - Potting and Encapsulating Materials
Details: CF15-2186 - Short work time, very quick cure elastomer for potting, moulding and encapsulation. Suitab
| Product Profile: | CF15-2186P.pdf |
|---|---|
| MSDS PDF A: | CF152186A.pdf |
| MSDS PDF B: | CF152186B.pdf |
Basic Product Overview: |
|
| Section: | Engineering Materials - General Purpose |
| Description: | Potting and Encapsulating Materials |
| NuSil ID: | CF15-2186 |
| Flow/Viscosity: | 75k |
| Cure System: | PT Addition |
| Cure Time/Temp: | 1 D / R.T. |
| Specific Gravity: | 1.1 |
| Durometer Type A Typical: | 25 |
| Tensile psi Typical: | 1200 |
| Tensile MPa Typical: | 8.3 |
| Elongation Percent Typical: | 625 |
| Tear PPI Typical: | 100 |
| Tear kN/m Typical: | 17.6 |
| Lap Shear psi/Mpa: | 330/2.3 |
| Dielectric Strength V/mil: | 730 |
| Operating Temp: | -65 to 240 |
| Mix Ratio: | 1:1 |
| Colour: | Trans |
| Comments: | Short work time, very quick cure elastomer for potting, moulding and encapsulation. Suitab |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
