 |
Back |
For full Warranty details please refer to the product profile!
1 pint 10-1 kit glass plastic
5 gallon kit 10 - 1 plastic metal
Engineering Materials - General Purpose - Molding Materials
Details: R-2186-2 - All purpose-black encapsulant, moulding material, typical viscosity 80000 cps
| Product Profile: | R-2186-2 Product Profile - Polymer Systems Technology Limited.pdf |
|---|---|
Basic Product Overview: |
|
| Section: | Engineering Materials - General Purpose |
| Description: | Molding Materials |
| NuSil ID: | R-2186-2 |
| Viscosity A: | 85,000 |
| Flow/Viscosity: | A:90k / B:5k |
| Cure System: | PT Addition |
| Work Time: | 3 H |
| Cure Time/Temp: | 15 M / 150 |
| Specific Gravity: | 1.15 |
| Durometer Type A Typical: | 35 |
| Tensile psi Typical: | 1050 |
| Tensile MPa Typical: | 7.2 |
| Elongation Percent Typical: | 450 |
| Tear PPI Typical: | 100 |
| Tear kN/m Typical: | 17.6 |
| Lap Shear psi/Mpa: | 535/3.7 |
| Operating Temp: | -65 to 240 |
| Mix Ratio: | 10:1 |
| Colour: | Black |
| Comments: | All purpose-black encapsulant, moulding material, typical viscosity 80000 cps |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
