 |
Back |
For full Warranty details please refer to the product profile!
Engineering Materials - Controlled Volatility - Thermally Conductive Materials
Details: CV-2942 - *22) 1.0 W/mK, *4) Primed Lap Shear 375 psi (2.6 MPa)
| Product Profile: | CV-2942.pdf |
|---|---|
| MSDS PDF A: | CV-2942_EU_English.pdf |
Basic Product Overview: |
|
| Section: | Engineering Materials - Controlled Volatility |
| Description: | Thermally Conductive Materials |
| NuSil ID: | CV-2942 |
| Flow/Viscosity: | Paste |
| Cure System: | PT Addition |
| Work Time: | 2.5 HR |
| Cure Time/Temp: | 1 D / R.T.*** |
| Specific Gravity: | 2.40 |
| Durometer Type A Typical: | 85 |
| Tensile psi Typical: | 650 |
| Tensile MPa Typical: | 4.5 |
| Elongation Percent Typical: | 15 |
| Tear PPI Typical: | 55 |
| Tear kN/m Typical: | 9.70 |
| Lap Shear psi/Mpa: | 375 (4.5) |
| Dielectric Strength V/mil: | 430 |
| Operating Temp: | -50 to 250 |
| Mix Ratio: | 20:1 |
| Colour: | Gray |
| Comments: | *22) 1.0 W/mK, *4) Primed Lap Shear 375 psi (2.6 MPa) |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
