 |
Back |
For full Warranty details please refer to the product profile!
Engineering Materials - Controlled Volatility - Electrically Conductive Materials
Details: CV2-2646 - Remains Conductive at High Temperatures 0.001 ohm-cm(1.5W/mK)
| Product Profile: | CV2-2646.pdf |
|---|---|
| MSDS PDF A: | en_gb_sds_nusicv2-2646.pdf |
Basic Product Overview: |
|
| Section: | Engineering Materials - Controlled Volatility |
| Description: | Electrically Conductive Materials |
| NuSil ID: | CV2-2646 |
| Cure System: | Tin Condensation |
| Work Time: | 2 HR |
| Cure Time/Temp: | 7 D / R.T. |
| Specific Gravity: | 3.23 |
| Durometer Type A Typical: | 75 |
| Tensile psi Typical: | 300 |
| Tensile MPa Typical: | 2.1 |
| Elongation Percent Typical: | 70 |
| Tear PPI Typical: | 55 |
| Tear kN/m Typical: | 9.7 |
| Lap Shear psi/Mpa: | 185 |
| Operating Temp: | -120 to 300 |
| Mix Ratio: | 100:0.5 |
| Colour: | Green Gray |
| Comments: | Remains Conductive at High Temperatures 0.001 ohm-cm(1.5W/mK) |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
