 |
Back |
For full Warranty details please refer to the product profile!
Engineering Materials - Controlled Volatility - Electrically Conductive Materials
Details: CV-1500 - 2.1 ohm - cm Primed Lap Shear 300psi (2.1MPa)
| Product Profile: | CV-1500.pdf |
|---|---|
| MSDS PDF A: | en_gb_sds_nusicv-1500.pdf |
Basic Product Overview: |
|
| Section: | Engineering Materials - Controlled Volatility |
| Description: | Electrically Conductive Materials |
| NuSil ID: | CV-1500 |
| Cure System: | Oxime |
| Work Time: | 10 M |
| Cure Time/Temp: | 7 D / R.T. |
| Specific Gravity: | 1.25 |
| Durometer Type A Typical: | 80 |
| Tensile psi Typical: | 650 |
| Tensile MPa Typical: | 4.5 |
| Elongation Percent Typical: | 20 |
| Lap Shear psi/Mpa: | 325 |
| Operating Temp: | -120 to 300 |
| Mix Ratio: | 1 Part |
| Colour: | Black |
| Comments: | 2.1 ohm - cm Primed Lap Shear 300psi (2.1MPa) |
 |
Back | Please note: Alternative sizes and packaging can and may be supplied, subject to availability of stock. Products pictured may vary and illustrations are for guidance only! |
